Exmark Lawn Tractor User Manual
Page 18
- 13 -
2.5.5
Deck Lift Assist Lever: Foot pedal that assists in raising the deck.
2.6
SEAT
2.6.1
Type:
Standard seat with high back, foam padded (internal suspension) and armrests.
Optional seat accessories:
• Custom ride suspension system to enhance Standard Seat.
• Deluxe suspension seat with high back, low profile foam-in-place cushion
(dampened, adjustable spring suspension) and armrests.
2.6.2
Mounting: Hinged to tilt up for access to hydraulic pumps, battery and other
components. Held in tilted position with prop rod. Adjustable fore and aft seat track.
2.6.3
Armrests:
Standard seat: foam padded flip-up armrests.
Optional suspension seat: molded adjustable flip-up
armrests.
2.6.4
Seat Safety Switch: Incorporated into the Safety Interlock System. Time delay
seat switch eliminates rough ground cut-outs.
2.7 HYDROSTATIC GROUND DRIVE SYSTEM
2.7.1
Hydrostatic Pumps: Two Hydro Gear PJ variable displacement piston pumps.
2.7.2
Wheel Motors: Two Parker TL with 1 1/4” tapered shafts.
2.7.3
Hydraulic Oil Type: Use Mobil 1 15W-50 Synthetic motor oil.
2.7.4
Hydraulic Oil Capacity: 2.1 qt.(2.0 L.)
2.7.5
Hydraulic Filter: Replaceable cartridge type.
P/N 1-513211: 10 microns, 18 psi bypass (Summer use above 32
° F (0°C))
P/N 1-523541: 40 microns, 18 psi bypass (Winter use below 32
° F (0°C))
2.7.6
Speeds: 0-9.8 mph (15.8 km/hr) forward.
0-6.3 mph (10.1 km/hr) reverse.
2.7.7
Drive wheel release valves allow machine to be moved when engine is not running.
2.8 TIRES & WHEELS
Drive Front
Caster
Pneumatic
(Air-Filled)
Semi-Pneumatic
Deck Size
60”, 66”, & 72”
All Decks
Quantity 2
2
Tread
“Multi- Trac C/S”
Smooth
Size
24 x 12.00-12
13 x 6.50-6
Ply Rating
4
Pressure
13 psi (90 kPa)
2.9 CUTTING DECK
2.9.1
Cutting Width:
60 in. (152.4 cm)
66 in. (167.6 cm)
72 in. (182.9 cm)
2.9.2
Discharge: Side
2.9.3
Blade Size: (3 ea.) w/60” Deck: 20.75 in. (52.7 cm)
w/66” Deck: 22.75 in. (57.8 cm)
w/72” Deck: 24.75 in. (62.9 cm)
2.9.4
Blade Spindles: Solid steel spindles with 1.18” (30mm) I.D. bearings.
2.9.5
Deck Drive: Electric clutch mounted on horizontal engine shaft. “B” Section belt
(with self-tensioning idler) from electric clutch to transfer shaft mounted on deck.
Blades are driven by one “B” Section belt (w/self-tensioning idler) from transfer
shaft on deck to blade spindles.