Primare I32 integrated amplifier User Manual
Page 7
i 3 2 u s e r g u i d e
c u s t o m i s i n g t h e
v o l u m e a n d b a l a n c e
The settings menu also allows you to customise
the start-up volume and balance, set when you
turn the I32 on from standby, and the maximum
volume.
To set the start-up volume
Set the Volume default setting to the volume
you want to use:
General settings
VOL
10
Master bal 00 LR 00
Volume default
25
Volume max
79
To set the start-up balance
Set the Master bal setting to the balance you
want to use:
General settings
VOL
10
Source offset
0
Master
00 LR 00
Volume default
10
To set the maximum volume
Set the Volume max setting to the highest
volume you want to allow:
General settings
VOL
10
Volume default
10
Volume max
60
Input5
Normal
s e t t i n g i n p u t t o
F i x e d l e v e l
Input 5 can be configured to provide high-quality
amplification of the main channels of a surround-
sound processor, with volume control provided by
the processor.
Note: This will give full-volume output.
•
Configure the Input5 option on the settings
menu to SSP.
General settings
VOL
10
Volume max
79
Input5
SSP
IR input
Front
s e t t i n g t h e i r i n p u t
•
Set the IR input to Front to control the I32
using a remote control pointed at the front
panel, or Back to control it via the IR-input
on the back panel:
General settings
VOL
10
Input5
Normal
IR input
Front
Factory DF
Reset
After setting it to Back you can reset it to Front
by operating the settings menu from the front
panel controls.
r e s e t t i n g t h e i 3 2
You can reset the I32 to the factory default
settings.
Warning: this will reset any source settings and
aliases you have defined.
To reset to the factory default settings
•
Highlight the Factory DF item and press the
R button on the front panel, or the SELECT
button on the remote control, to select it.
You will be prompted:
General settings
VOL
10
Confirm factory DF
Yes
No
•
Turn the SELECTOR control on the front
panel, or press the V button on the remote
control, to highlight Yes.
•
Press the R button on the front panel, or the
SELECT button on the remote control, to
proceed and reset the I32.
Alternatively, if you choose not to reset, highlight
No and press the R button on the front panel,
or the SELECT button on the remote control,
to select it.