Precision Medical Continuous Subglottic Suction Regulator - Manual (Page 4)

3
PM9100 Continuous
Subglottic Suction Regulator
wARNING
• dO NOT use this Continuous Subglottic Suction Regulator for
anything other than its Intended Use. Personal injury and / or damage
to Regulator may result from misuse.
• Only personnel instructed and trained in its use should operate this
Continuous Subglottic Suction Regulator.
INSTALLATION
The Pm9100 Continuous Subglottic Suction Regulator has a 1/8” NPT female
inlet connection on the back of the regulator. There are two (2) configurations
available for purchase.
1. The Pm9100 connected directly to the wall suction outlet via a Precision
Medical, Inc. 90° elbow and user specified fitting.
2. The Pm9100 interfaced with an existing vacuum regulator using a
Precision Medical, Inc. street tee (Part# 7032) and user specified fitting.
a. Install street tee to back of existing vacuum regulator. Ensure the
outlet of the tee is pointing in the direction that the regulator is to be
mounted.
b. Install Hex connector with regulator attached to street tee.
c. Install suction fitting to street tee.
d. Test connections to ensure they are leak free. Leaks may effect the
performance accuracy of the Pm9100 Continuous Subglottic Suction
Regulator.
SPECIFICATIONS
dimensions: