Electrolux 66301K-MN - Manual (Page 10)

10
Switching the outside ring on and off
By switching the outside rings on or off, the effective heating surface
can be matched to the size of the cookware.
3
Before an outside ring can be switched on, the inside ring must be
switched on.
Switching the STOP+GO function on and off
The STOP+GO function simultaneously switches all cooking zones that
are switched on to the keep warm setting and then back to the heat
setting that was previously set. This function can be used to briefly in-
terrupt and then continue the cooking process e.g. to take a telephone
call.
3
Timer functions are not stopped by STOP+GO.
3
STOP+GO locks the whole control panel except the sensor field .
Triple cooking zone Sensor panel Power indicator
To switch on middle ring Touch for 1-2 seconds
.
One power indicator is lit.
To switch on outside ring Touch for 1-2 seconds
.
Two power indicators are
lit.
To switch off outside ring Touch for 1-2 seconds
.
Second power indicator
goes out.
To switch off middle ring Touch for 1-2 seconds
.
First power indicator goes
out.
Roasting zone Sensor panel Power indicator
To switch on outside ring
Touch for 1-2 sec-
onds
is lit
To switch off outside ring Touch for 1-2 seconds goes out
Control panel Display
To switch
on Touch STOP+GO
u
To switch
off Touch STOP+GO heat setting that was previ-
ously set (not automatic
warm up function)