Exmark Lazer Z XS - Manual (Page 19)

14
2.10 DIMENSIONS
2.10.1 Overall Width: without deck deflector up deflector down
60” Deck 53.5 in. (135.9 cm) 61.4 in. (155.8 cm) 72.8 in. (184.9 cm)
66” Deck 57.3 in. (145.5 cm) 68.0 in. (172.7 cm) 79.4 in. (201.7 cm)
72” Deck 61.5 in. (156.2 cm) 74.3 in. (188.7 cm) 85.8 in. (217.9 cm)
2.10.2 Overall Length: Roll Bar – Up Roll Bar - Down
60” Deck 81.9 in. (208.0 cm) 92.5 in. (235.0 cm)
66” Deck 83.4 in (211.8 cm) 94.0 in (238.8 cm)
72” Deck 85.8 in. (217.9 cm) 96.4 in. (244.9 cm)
2.10.3 Overall Height: Roll Bar - Up Roll Bar - Down
60”, 66” & 72” Decks 72.7 in. (184.7 cm) 53.6 in. (136.1 cm)
2.10.4 Tread Width: (center to center of tires, widthwise)
Drive Wheels Casters
60” Deck 41.9 in. (106.4 cm) 37.3 in. (94.7 cm)
66” Deck 45.9 in. (116.6 cm) 42.3 in (107.4 cm)
72” Deck 45.9 in. (116.6 cm) 47.3 in. (120.1 cm)
2.10.5 Wheel Base: (center of caster to center of drive tire)
60” Deck 56.0 in. (142.2 cm)
66” Deck 57.6 in. (146.3 cm)
72” Deck 60.2 in. (152.9 cm)
2.10.6 Curb Weight:
60” Deck 1510 lbs. (685 kg)
66” Deck 1560 lbs. (708 kg)
72” Deck 1610 lbs. (730 kg)
2.11 TORQUE REQUIREMENTS
Bolt Location Torque
Blade Drive Sheave Mounting Nut ............................... 90-110 ft-lbs. (122-149 N-m)
Cutter Housing Spindle Nut ..................................... 160-185 ft-lbs. (217-251 N-m)
Blade Mounting Bolt (lubricate with anti-seize)...................55-60 ft-lbs. (75-81 N-m)
Engine Deck/Front Frame Mount Bolts ..............................30-35 ft-lbs. (41-47 N-m)
Anti-Scalp Roller (See Figure 6)
Nyloc Nut ..................................................................30-35 ft-lbs. (41-47 N-m)
Hex Capscrew...........................................................50-55 ft-lbs. (68-75 N-m)
Engine Mounting Bolts ......................................................30-35 ft-lbs. (41-47 N-m)
Wheel Lug Nuts............................................................. 90-95 ft-lbs. (122-129 N-m)
Wheel Motor Mounting Bolts............................................72-77 ft-lbs. (98-104 N-m)
Wheel Hub Slotted Nut .............................................minimum 125 ft-lbs. (169 N-m)
Rollover Protection System (Roll Bar) Mounting Bolts .......30-35 ft-lbs. (41-47 N-m)
Clutch Retaining Bolt (secured with threadlocker) .......................55-60 ft-lbs. (N-m)
3. OPERATION INSTRUCTIONS
3.1 CONTROLS
3.1.1 Familiarize yourself with all controls before operating the mower.