El-skyport modules, Troubleshooting, Ce statements – Elinchrom D-LITE 2 IT User Manual
Page 20: English
EL-Skyport Modules
EL-Skyport Universal SPEED (NEW) / Universal (previous version)
• Universal Receiver for all makes of Flash having a SYNC socket, conforming to Sync
norms!
EL-Skyport Transceiver RX
• This Transceiver is only for Elinchrom RX units. The module operates all RX
features with the EL-Skyport / ERS- software 3.0 and triggers the flash
EL-Skyport USB RX SPEED (NEW) / USB RX (previous version)
• To operate RX flash units via computer the USB module should be used together
with the EL-Skyport Transceiver RX and the ERS- software 3.0
Troubleshooting
Should an error occur, first check the following points:
Having this problem?
Check the following points:
No Flash unit can be triggered
with the Transmitter
Check if the Transmitter is switched ON
Check battery polarity
Check if the Receiver module is connected correctly to the unit
Check if the frequency selector switch is set to the same channel
Check if Transmitter is in the same trigger mode Speed or Standard.
Some units do not fire when trig-
gered with the Transmitter
Reduce distance to any “not working” unit.
Check if Transmitter is in the same trigger mode Speed / Standard.
TEST flash works, but the camera
will not trigger Flash unit
Check hot-shoe fitting
Limited Distance range
Reposition the unit
Increase the distance to walls and ceilings
CE Statements
This device has been tested and found to comply with the requirements set
up in the council directive on the approximation of the law of member states relating
to EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC and R&TTE Directive
99/5/EC
19
Universal Speed
& Universal
Transceiver RX
19353
USB RX Speed
& USB RX
English