Elinchrom D-LITE 2 IT - Manual (Page 13)

12
Integrated EL- Skyport Transceiver For Wireless Triggering – Setup English
Group Settings
Frequency Channel Settings
EL-Skyport on / off
The EL-Skyport on / off, Group, Frequency Channel can be customised.
Press the flash power up-down buttons together to enter into the “Advanced Feature Setup”
Display shows
Change settings with the flash power up-down buttons
r.0 EL-Skyport off
r.1 EL- Skyport on
r.2 EL-Skyport speed mode (only available with EL-Skyport Speed /
ECO)
After 3 to 4 seconds the settings are saved automatically and the display shows the flash power
setting.
Press the flash power up-down buttons together to enter into the “Advanced Feature Setup”.
Then, scroll to G.1 using the Prop/Free button.
Display shows
Select Group with the flash power up-down buttons
G.1 Group 1 (standard setting)
G.2 Group 2
G.3 Group 3
G.4 Group 4
After 3 to 4 seconds the settings are saved automatically and the display shows the flash power
setting.
Press the flash power up-down buttons together to enter into the “Advanced Feature Setup”.
Then, scroll to F.1 using the Prop/Free button (only use in cases of interference with
other systems).
Display shows
Change the Channel with the flash power up-down buttons
F.1 to F.4 Select Frequency Channel from 1 – 4.
Note: The transmitter must have the same Frequency Channel
setting. Standard setting is Frequency Channel 1.
After 3 to 4 seconds the settings are saved automatically and the display shows the flash power
setting.