MEDC dSLB 20 - Manual (Page 4)

­
User Information
Please note the following warnings and security information:
1. The installation and adjustment of the device must be carried out by qualified personnel in accordance with the
prescribed installation regulations taking the specified type of protection into account.
2. The device should not be operated in areas in which strong charges are generated, machines work by friction or
cutting, electrons are sprayed (e.g. in the vicinity of electrostatic paint equipment), or pneumatically transported dust
occurs.
3. If the device is damaged, it may not be operated.
4. While operating the device in business or industry facilities, the legally required precautions against accidents resulting
from the use of electrical systems and devices must be taken.
5. The device may be operated solely under the stated ambient conditions. Unfavourable ambient conditions can lead to
damage of the device and thus present a potential danger for the user.
Such unfavourable ambient conditions could include:
• moisture, dust (pay attention to the degree of protection)
• Flammable gases, vapours, solvents not covered by the type of protection
• too high ambient temperatures (see Technical Specifications)
• Too low ambient temperatures (see Technical Specifications)
6. Repairs may be carried out by the manufacturer or by a person appointed by the manufacturer followed by a renewed
product conformity inspection.
7. The device may only be cleaned using a damp cloth in order to avoid electrostatic charging.
8. Make sure the device and the wiring are voltage-free upon connecting the wires in the terminal room.
9. During operation of the device the temperature must not exceed nor fall below the prescribed range of temperatures.
Prevent unallowed radiation energy and convection in the vicinity of the device.
10. The device should be positioned in such a way that mechanical damage, e.g. due to falling parts or lateral impact is
prevented.
11. The signalling light may not be operated while covered.
12. The cover, under which the luminaire is situated, is inseparably connected with the lower part of the housing. A forced
opening will destroy the device!
13. The manufacturer cannot be made liable for damages arising from or pertaining to the connection!
Should these points not be observed, the explosion protection of the device will no longer be given. The device will then
represent a danger to the life of the user and can cause the ignition of an explosive atmosphere.
Subject to alterations or errors
FHF Funke + Huster Fernsig GmbH
Gewerbeallee 15-19 · D-45478 Mülheim an der Ruhr
Phone +49 / 208 / 82 68-0 · Fax +49 / 208 / 82 68-286
http://www.fhf.de · e-mail: [email protected]