MEDC LD15 User Manual

Page 9

Conditions of Safe use

The following conditions apply to the installation,operation and maintenance of the LD15.
Failure to observe these may compromise the safety intergrity of the Beacon

maintenance, proof tests, maximum ratings, environmental conditions, repair, etc.

5839

1. The user shall comply with the requirements given in this Safety manual in regard to

2. If the Beacon is to be used on a Fire Alarm system it is recommended as per BS

part 1 (eq. EN 54), that the product is tested at least once a week. In all other

3. Selection of this equipment for use in safety functions and the installation,

4. All information associated with any field failures of this product should be collected

all relevant functional safety aspects such as application of use, installation, operation,

applications it is strongly recommended to test the product at least once a year.

configuration, overall validation, maintenance and repair shall only be carried out by
competent personnel, observing all the manufacturer’s conditions and
recommendations in the user documentation.

under a dependability management process (e.g., IEC 60300-3-2) and reported to
the manufacturer.

04/15