MEDC FB15 User Manual

Page 5

Where Dip signifies suitability for use in the presence of dust

Where A21 signifies suitability for use in the presence of dust in a Zone 21 area.

ATEX units

Certified to EN50014:1997, EN50281-1-1:1998 and EN50018:2000

ATEX certification No. Baseefa04ATEX0009X

For a 60W bulb:

EE xd IIC T200°C (Tamb -55°C to +70°C)

T135°C (Tamb -55°C to +55°C)

For a 100W bulb:

EE xd IIC T200°C (Tamb -55°C to +40°C)

The ATEX certificate and product label carry the ATEX group and category marking:

II 2 GD

Where:

Signifies compliance with ATEX

II Signifies suitability for use in surface industries

2 Signifies suitability for use in a zone 1 area

G Signifies suitability for use in the presence of gases

D Signifies suitability for use in the presence of dust

The ATEX certificate and product label also carry the following mark:

This signifies unit compliance to the relevant European directives, in this case 94/9/EC, along with the number

dy issuing the EC type examination certificate.

6. SPECIAL CONDITIONS FOR SAFE USE

1. Painting and other surface finishes, other than those applied by the manufacturer, are not permitted

2. In order to maintain the dust tight integrity of the enclosures (IP6X), the threads f cable entry devices

installation

of the notified bo

and stopping plugs shall be sealed in accordance with the applicable code of practice for flameproof

02/12