Medal Sports 42112 - Manual (Page 8)

7
FIG.5
13. Place the table surface to the Caster Frame (pre-assembled, see FIG. 4). Then attach the table surface to the Caster
Frame using two Bolts (#19), four Washers (#12) and two Nuts (#14) per Table Surface. See FIG.5A.
Note: At least two adults are required to move the table halves for safety.
14. Attach the Linkage Tube - B (#7) to the Curved Leg (#3) using one Bolt (#11), two Washers (#12), one Spacer (#13)
and one Nut (#14) per Linkage Tube - B. See FIG.5B. Now go back and tighten all connections.
15. Repeat the steps for another table half.
FIG. 5A
FIG. 5B
FIG. 6
FIG. 5
FIG.6
16. Unfold the table halves, then attach the Net Post (#25) at the middle of the table. Stretch the Net (#24) across the
center of the table and slip the net over the post on the opposite side. See FIG. 6.
24
25
25
24
=1
=2
11
12
13
19
14
=4
=16
=4
=8
=4
11
12
13
12
3
4
14
14
12
12
19
7