Medal Sports 42112 - Manual (Page 5)

4
1. Find a clean, level place to begin the assembly of your Table Tennis Table. The table will be assembled upside down
and then turned over. This is a heavy game and tuning it over will require at least two strong adults.
2. Remove all the parts from the box and verify that you have all of the listed parts as shown on the parts list
page. Carefully cut or tear the four corners of the box so that the bottom of the box can be used as your work
surface.
ASSEMBLY INSTRUCTIONS
FIG.1
3. Attach the Curved Leg (#3) to the Table Surface - A (#1) using one Bolt (#16), two Washers (#12) and one Nut (#14)
per Leg. See FIG.1A.
4. Attach the Linkage Tube - A (#5) to the Curved Leg (#3) using four Bolts (#15), eight Washers (#12) and four Nuts
(#14) per Linkage Tube - A. See FIG.1B.
1
2
3
12 =24
=12
=8
=4
=2
=4
=1
=1
5
14
15
16
Player
FIG. 1
2
FIG. 1A
FIG. 1B
31
15
12
14
12
5
3
16
14
12
12
Player
Center
1
5
30
31
3