Medal Sports 58102 - Manual (Page 8)

7
FIG. 8
11. Attach the Rim Assemblies (#17) and Rim Support Plates (#18) to the Backboard (#21) using the Bolts (#23),
washers (#35) and Nuts (#33). And then attach the Switch Sensor (#15) to the Backboard (#21) using the
Bolts (#23), washers (#35) and Nuts (#33). Make sure that you use washer on both sides of the backboard as
shown in FIG. 8.
FIG. 9
12. Attach Electronic Scorer Face Plate(#30) to Backboard and connect with the Electronic Scorer(#14) using Bolts
(#29) as shown in FIG. 9.
FIG. 9
FIG. 8
33
15
15
17
17
35
35
23
23
33
35
35
18
18
21
TIME
VISIT OR
HOME
29
21
14
30