Fig. 2 fig. 1, Fig.1, Fig.2 – Medal Sports FH15402 User Manual
Page 6
FIG.1
FIG. 2
FIG. 1
5
ASSEMBLY INSTRUCTIONS:
1. Find a clean, level place to begin the assembly of your Air Hockey Table. The table will be assembled upside
down and then turned over on its legs once the assembly completed. This game table is heavy, and turning
it over will require at least four strong adults.
2. Remove all the parts from the box and verify that you have all of the listed parts as shown on the parts list
page.Carefully cut or tear the four corners of the box so that the bottom of the box can be used as your work
surface.
X 2
X 1
1
2
X 12
X 2
3
6
X 1
5
X 12
7
X 4
14
3. Attach the Legs (#2 and #3) to the Main frame (#1) using three Bolts (#6) and three Washers (#7) per
leg.
See FIG. 1.
4. Screw the Leg Levelers (#14) into the bottom of each leg.
FIG.2
5. Attach the End Leg Panel (#4) to the Legs using six Screws (#8) per Leg Panel.
See FIG. 2.
6. Lift the table assembly from the floor with at least two strong adults, turn it over, and set the table assembly
on its legs in the location where you play.
Go back and make sure that all connections are tight.
X 12
X 2
4
8
7
6
6
7
1
2
3
2
3
14
5
A3
A2
A3
8
4