Medal Sports BL17201 - Manual (Page 6)

FIG. 1
5
ASSEMBLY INSTRUCTIONS:
1. Find a clean, level place to begin the assembly of your Air Hockey table. The table will be assembled
upside down and then turned over on its legs once the assembly completed. This game table is heavy, and
turning it over will require at least two strong adults.
2. Remove all the parts from the box and verify that you have all of the listed parts as shown on the parts
identifier below. Carefully cut or tear the four corners of the box so that the bottom of the box can be used
as your work surface.
3. Attach the Left Leg (#2) and Right Leg (#3) to the Main Cabinet (#1) using three Bolts (#A2) and three
Washers (#A3) per Leg. See FIG.1.
4. Attach the Leg Panel (#4) to the Leg using six Screws (#A4) per Leg Panel. See FIG.1.
5. Screw the Leg Leveler (#5) into the Leg. See FIG.1.
6. Lift the table assembly from the floor with at least two strong adults, turn it over, and set the table assembly
on its legs in the location where you play.
FIG.1
DO NOT LEAN THE
TABLE ON ITS LEGS
HOLD TABLE
CABINET
DO NOT HOLD THE LEGS
CAUTION: Two strong adults are recommended to turn the table
over as shown.
1. Lift the table off the ground.
2. Turn the table over.
3. Place it on all four feet at the same time on the ground.
A2
5
A3
4
A4
A4
2
3
4
2
3
P8
P10
P9
P1
P6
1
X 2
X 2
X 4
X 1 1
2
3
4
X 12 A2
X 12 A3
X 24 A4
X 4 5