Electrolux DISHLEX DX 103 - Manual (Page 3)

• A qualified and competent person must do the
electrical installation.
• A qualified and competent person must do the
plumbing installation.
• Do not change the specifications or modify this
product. Risk of injury and damage to the appli-
ance.
• Do not use the appliance:
– if the mains cable or water hoses are damaged,
– if the control panel, worktop or plinth area are
damaged so that you can get access to the in-
ner side of the appliance.
Contact your local Customer Care Centre.
• Do not drill into the sides of the appliance other-
wise damage to hydraulic and electrical compo-
nents may occur.
Warning! Carefully obey the instructions for
electrical and water connections.
Control panel
1 Program knob
2 Start/cancel button
3 Indicator light 'Finished'
4 On/off indicator light
5 Program marker
Indicator lights
Finished Comes on when the washing program is completed. It also has
the auxiliary functions of alarm if the appliance has a malfunc-
tion.
Program knob and on/off indicator light
• To set a washing program, turn the program knob
clockwise or anticlockwise. The program marker
on the program knob must agree with one of the
washing program on the control panel.
– The on/off indicator light comes on (position
ON).
• To set the appliance to the off position, turn the
program knob until the program marker agrees
with the on/off indicator light.
– The on/off indicator light goes off (position
OFF).
3