beautypg.com

Electrolux DISHLEX DX 103 User Manual

Page 10

background image

Fault code and malfunction

Possible cause and solution

• continuous flash of the start/cancel

indicator light

• 1 flash of the 'Finished' indicator

light

The appliance does not fill with water

• The water tap is blocked or furred with limescale.

Clean the water tap.

• The water tap is closed.

Open the water tap.

• The filter in the water inlet hose is blocked.

Clean the filter.

• The connection of the water inlet hose is not correct. The hose

can be kinked or squashed.
Make sure that the connection is correct.

• continuous flash of the start/cancel

indicator light

• 2 flashes of the 'Finished' indicator

light

The appliance will not drain

• There is a blockage in the sink spigot.

Clean the sink spigot.

• The connection of the water drain hose is not correct. The hose

can be kinked or squashed.
Make sure that the connection is correct.

The program does not start

• The appliance door is not closed.

Close the door.

• Mains plug is not connected.

Plug-in appliance to the mains.

• The fuse has blown out in the household fuse box.

Replace the fuse.

After the check, switch on the appliance. The pro-
gram continues from the point of interruption. If the
malfunction shows again, contact your Customer
Care Centre.
For other fault codes, not described in the chart, con-
tact your Customer Care Centre.
These data are necessary to help you quickly and
correctly:
• Model (Mod.)

• Product number (PNC)
• Serial number (S.N.)
For these data, refer to the rating plate.
Write the necessary data here:
Model description : ..........
Product number : ..........
Serial number : ..........

The cleaning results are not satisfactory

The dishes are not clean

• The selected washing program is not applicable for the type of load and

soil.

• The baskets are loaded incorrectly so that water cannot reach all surfa-

ces.

• Spray arms do not turn freely because of incorrect arrangement of the

load.

• The filters are dirty or not correctly installed.
• The quantity of detergent is too little or missing.

The dishes are wet and dull

• No rinse aid has been used.
• The rinse aid dispenser is empty.

10