MCZ De Chirico User Manual
Page 7
INSTALLATION AND USE MANUAL
Chapter 3
DE CHIRICO
page
7
Chapter 3
Technical service – all rights reserved by mcz spa
Reproduction prohibited
3.2. PHASE 1 - POSITIONING OF FIREPLACE STOVE FORMA PURO115
Position Forma Puro115 as set forth in the respective
Manual for Installation and Use (see “Safe
Distance").
Raise the unit to the desired height with respect to the floor. Concerning this, refer to the figure in
chapter 2, which indicates the extension of the De Chirico frame from under the edge-cover profile towards the
floor (164 mm). The frame does not require the machine, Forma Puro115, to be at any certain distance from the
floor. This is at your discretion, provided you comply with the minimum space for the cladding.
A second
adjustment of the unit (minor variations), if necessary, is made during assembly of the cladding.
After positioning and installing the unit Forma Puro115 in accordance with the instructions in the respective
Manual for Installation and Use , run a quick test for proper operation. If the test is successful, you can install
the De Chirico cladding.
PAVIMENTO
BASE APPOGGIO
FORMA PURO
DISTANZA
DI SICUREZZA
VARIABILE
NO
N <17
0
MM
PROFILO
COPRIBORDO