Stub overnight coating assembly – MCZ Stub User Manual
Page 37

I
I
I
P
I
I
35
8-STUB OVERNIGHT COATING ASSEMBLY
At the top, fix the panels to the structure with the screws “I” supplied (FIG.7).
Rear panel assembly in the event of rear air outlet.
If there is a top smoke outlet, the two side panels meet at the back and are secured (figure 11) at the top with the two screws “I”. For the
rear smoke outlet, insert the panel “P” in the joint located at the bottom of the stove (FIG.8-10) and then at the top (FIG.9) fix the rear
panel to the two side panels with the two screws “I” supplied.
Inserting the top will enable to complete panel assembly.
FIG.7 SIDE PANELS UPPER FIXING
FIG.9 UPPER FIXING
FIG.8 REAR PANEL ASSEMBLY
FIG.10 DETAIL OF REAR PANEL LOWER JOINT
FIG.11 PANEL WITH UPPER AIR OUTLET
Technical Dept. - All rights reserved - Reproduction is prohibited