MCZ Stripe Overnight - Manual (Page 22)

20
4-INSTALLATION AND ASSEMBLY
ASSEMBLING THE SIDE CLADDING
The metal sides are not particularly difficult to install. The main precaution is to install the sides of the product only when the latter is set
in place. Moving the product with the sides assembled might damage the flooring.
Firstly, place the front panel (with the hole for the door) on the structure of the product with the side holes of the panel in line with the
holes on the structure of the product. Open the stove door to place the fron panel in its housing (FIG.A).
Fasten the panel with the three screws on the right and the three screws on the left.
IMPORTANT:
When you place the front panel on the structure it is necessary to match the knob up with the hole in the panel.
INTERNAL PANEL
PANEL FASTENING
FRONT PANEL FASTENING
HOLE IN PANEL
KNOB
FIG.A