Encore electronic ENMGS-16+2 - Manual (Page 36)

Configuration Setting
Find that there are seven items, including Port Setting, IEEE 802.1Q
VLAN Settings, Trunk Setting, Mirror Setting, IEEE 802.1p Default
Priority, Broadcast Strom Control Setting, Jumbo Frame Setting in
Setup menu.
Port Settings
In Port Settings menu (Figure 17), this page will show each port’s
status, selected drop down menu to set each port’s Speed, and QoS
priority then press “Apply” button to activate changes. To refresh the
information table to view the latest port setting and Link Status, press
the Refresh button.
The Link Status in the screen will show the connection speed and
duplex mode; else this dialog box will show Down when the port is
disconnected.
Figure 17. Port Setting
Note: The priority of Gigabit Fiber port is higher than Copper.
Speed:
28