V-chip set up, Tv rating set up, Make sure – Emerson EWC20D4 User Manual
Page 17: Tv/dvd power must be turned on
– 17 –
EN
0C28
V-CHIP SET UP
V-CHIP enables parents to prevent their children
from watching inappropriate material on TV.
V-CHIP reads the ratings for programming (except
for news and sports programs, unedited movies on
premium cable channels, and Emergency Broadcast
System signals), then denies access to programming
if the program’s rating meets the limitations you
select. In this case, “PROTECTED PROGRAM by
...” message appears on the TV screen.
To block ratings, follow the steps below.
•
Programming may be rated by the Motion Picture
Association of America (MPAA) or according to
the Television Parental Guidelines. In order to
block any inappropriate programming, set your
limits in both places (MPAA RATING and TV
RATING).
TV RATING SET UP
Make sure ...
•
TV/DVD power must be turned on.
1
Select “V-CHIP SET UP”
Press SETUP on the remote control.
Press Arrow (K/L) to point to “V-
CHIP SET UP”.
Then, press ENTER.
2
Input Access code
Press the number buttons to enter 4-
digit access code. The default code
is 0000.
3
Select “TV RATING”
Press Arrow (K/L) to point to “TV
RATING”.
Then, press ENTER.
4
Select your desired item
Press Arrow (K/L) to point to your
desired item.
Then, press ENTER to select
[BLOCK] or [VIEW].
TV
Selection
Rating Category Explanations
TV-Y
Appropriate for all children
TV-Y7
Appropriate for children seven and older
TV-G
General Audience
TV-PG
Parental Guidance suggested.
TV-14
Unsuitable for children under 14
TV-MA
Mature audience only
•
When you select a rating category and turn it
[BLOCK], the higher rating will turn [BLOCK]
automatically. Also, the lower rating will turn
[VIEW] automatically.
•
When you turn “TV-Y” to [VIEW], the all ratings
will turn to [VIEW] automatically.
- TV SETUP -
CHANNEL SET UP
B
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ACCESS CODE
_ _ _ _
B
TV–Y
[VIEW]
TV–Y7 (
)
[VIEW]
TV–G
[VIEW]
TV–PG (
)
[VIEW]
TV–14 (
)
[VIEW]
TV–MA (
)
[VIEW]
– V-CHIP SET UP –
B
TV RATING
MPAA RATING
CHANGE CODE
When you select TV-Y7, TV-PG, TV-14, or TV-MA
and you press ENTER, the sub-ratings will appear
on the TV screen.
If you select the rating category (example: TV-PG)
and turn it [BLOCK] or [VIEW], the sub-ratings
(example: V for Violence) will turn [BLOCK] or
[VIEW] automatically.
You can set the sub-ratings to [BLOCK] or [VIEW]
individually when the rating category is set to
[BLOCK].
To set the sub-ratings individually, follow the steps
below.
•
When you select [TV-Y7]:
Press Arrow (K/L) to select
“FV” (Fantasy Violence).
Then, press ENTER to select
[BLOCK] or [VIEW].
•
When you select [TV-PG], [TV-14] or [TV-MA]:
Press Arrow (K/L) to select
“D”(Suggestive Dialog),
“L”(Coarse Language),
“S”(Sexual Situation), or
“V”(Violence). Then, press
ENTER to select [BLOCK] or [VIEW].
NOTE: When you select [TV-MA], “D” does not
appear on the TV screen.
•
The sub-ratings which set to
[BLOCK] appears next to the rat-
ing category in the TV RATING
menu.
5
Exit the V-Chip setting mode
Press SETUP on the remote control to return to orig-
inal mode.
TV–Y7
[BLOCK]
B
FV
[BLOCK]
TV–PG
[BLOCK]
B
D
[BLOCK]
L
[BLOCK]
S
[BLOCK]
V
[BLOCK]
B
TV–Y
[VIEW]
TV–Y7 (
)
[VIEW]
TV–G
[VIEW]
TV–PG (DLSV )
[BLOCK]
TV–14 (DLSV )
[BLOCK]
TV–MA ( LSV )
[BLOCK]