beautypg.com

Care and maintenance, Cordless hand sweeper, Troubleshooting guide – Euro-Pro V1707H User Manual

Page 4

background image

Care and Maintenance

To improve the performance and life of your unit, we recommend you do

the following:

1. Once a month clean the unit with a dry cloth, including the chamber into

which the dust tray fits. Remove any hair, fiber or other materials that

may have built up in the chamber and on the rotating brush.

2. Don't use abrasive materials to clean the hand sweeper. Do not immerse

the unit in water.

3. Do not pick up liquids or use on wet floors.

4. Do not use on concrete, tar or similar rough surfaces .

5. Don't pick up pieces of string or fabrics with the sweeper.

6. Do not clean tasseled or frayed carpets with the sweeper.

7. To remove the squeegee, turn the screw plug a quarter turn counter

clockwise and slide the squeegee out. Slide the new squeegee in and then

turn the screw plug a quarter turn clockwise to lock the squeegee in place.

For replacement squeegees, call 1 (800) 798-7398.

CORDLESS HAND SWEEPER

Model V1707H

4.8 Volt DC

TROUBLESHOOTING GUIDE

PROBLEM

POSSIBLE REASON

POSSIBLE SOLUTION

SWEEPER WILL NOT
OPERATE

1. Batteries

discharged.

2. No power in electrical

outlet supplying
transformer.

3. Unit needs servicing.

1. Charge

unit.

2. Check fuse or breaker.

Replace fuse/reset breaker.

3. Call Customer Service.

SWEEPER WILL NOT
PICK-UP

1. Dust tray is full.
2. Unit needs recharging.
3. Brush bar dirty.

1. Empty dust tray.
2. Charge

unit.

3. Clean

brush

bar.

DUST ESCAPING
FROM SWEEPER

1. Dust tray is full.
2. Brush bar dirty.

1. Empty

dust

tray.

2. Clean

brush

bar.

ROTATING BRUSH
WILL NOT PICK UP

1. Unit

clogged.

2. Dust tray is full.

1. Check

for

excessive

material

on brush or in bottom of
sweeper. Remove obstruction
from brushes and/or sweeper.

2. Empty and clean dust tray.

SWEEPER WILL NOT
CHARGE

1. Electrical

outlet

not

working

2. Charging Adapter not

working

3. Batteries

no

longer

functioning

4. On/Off switch is in the ON

position.

1. Check to ensure outlet is
working properly. (Easily
checked by plugging in
another appliance.
2. Replace charging adapter
3. See battery disposal.
4. Depress On/Off switch.

6. Charging Jack
7. Pivoting Telescopic Handle
8. Charging Adapter
9. Telescopic Handle Release Button
10. Headlight (x2)
11. Charging Stand with Wall Mount Screws

1. On / Off Switch
2. Charging Light Indicator
3. Dust Tray
4. Transparent Brush Cover
5. Rotating Brush

Note: Illustrations may differ from actual unit.

NOTE:

Cordless Hand Sweeper is shipped with the batteries
uncharged. Charging of the unit for 24 hours prior to first use
is required. Use replacement battery # XB1707H only.

2

7