Echo SHRED'N'VAC ES-255 - Manual (Page 21)

21 S
hred
'N'V
ac
®
O
peratOr
'
S
M
aNual
exhausT sysTem
Spark Arrestor Screen
Level 2.
Tools required: Cross Head Screwdriver, 4 mm Hex Wrench, Soft
metal brush
Parts Required: Spark arrestor screen, Gasket
1. Remove engine cover (two screws), pull cover away from engine.
Clean cylinder fins with brush to allow cooling air to pass freely.
2. Remove spark arrestor cover (A), deflector (B), plate (C), gasket
(D), and spark arrestor screen (E) from muffler. Replace screen if
plugged with carbon deposits.
NOTE
When cleaning carbon deposit, be careful not to damage the cata-
lytic element inside muffler.
3. Install spark arrestor screen, gasket, plate, deflector, and cover.
4. Loosely reassemble engine cover with two screws.
5. Tighten all screws securely.
A
b
D
C
Cleaning Cylinder Fins
1. Remove engine cover (two screws), pull cover away from engine.
Clean cylinder fins to allow cooling air to pass freely.
2. Loosely reassemble engine cover with two screws.
3. Tighten all screws securely.
E