Echo HC-235 - Manual (Page 26)

26
s
peCIfICATIoNs
MODEL ---------------------------------------------------- HC-235
Length ------------------------------------------------------ 1,113 mm (43.81 in.)
Width -------------------------------------------------------- 273 mm (10.75 in.)
Height ------------------------------------------------------- 215 mm (8.5 in.)
Weight, dry ------------------------------------------------- 5.8 kg (12.79 lb.)
Type of Engine --------------------------------------------- Air cooled, two-stroke, single cylinder, gasoline engine
Displacement ----------------------------------------------- 21.2 cc (1.29 cu.in.)
Bore ---------------------------------------------------------- 32.2 mm (1.27 in.)
Stroke -------------------------------------------------------- 26.0 mm (1.02 in.)
Exhaust System -------------------------------------------- Spark arrestor muffler or spark arrestor muffler with catalyst
Carburetor--------------------------------------------------- Diaphragm model w/purge pump
Ignition System -------------------------------------------- Flywheel Magneto, Capacitor discharge ignition
Spark Plug -------------------------------------------------- NGK BPM-8Y (Gap 0.65 mm (0.026 in.)
Fuel ---------------------------------------------------------- Mixed Fuel - gasoline and oil
Fuel/Oil Ratio ---------------------------------------------- 50 : 1 Power Blend X™ ISO-L-EGD (ISO/CD 13738) and
J.A.S.O. M345- FD, two-stroke, air-cooled engine oil.
Gasoline ----------------------------------------------------- Use 89 Octane unleaded. Do not use fuel containing methyl
alcohol, more than 10% ethyl alcohol or 15% MTBE. Do not use
alternative fuels such as E-15 or E-85.
Oil ------------------------------------------------------------ Power Blend X TM Premium Universal 2-Stroke Oil
Fuel Tank Capacity ---------------------------------------- 0.5 lit. (16.9 fl. oz)
Starter System ---------------------------------------------- Automatic Recoil Starter
Clutch-------------------------------------------------------- Centrifugal Type
Gear Case Ratio -------------------------------------------- 4.67:1
Cutter Bar --------------------------------------------------- Single Edge
Length ---------------------------------------------------- 726 mm (28.58 in.)
Pitch ------------------------------------------------------- 35 mm (1.4 in.)
Height ----------------------------------------------------- 23 mm (0.91 in.)
Maximum Diameter Cut
Soft Material ---------------------------------------------- 25.4 mm (1 in.)
Woody Material ------------------------------------------- 13 mm (1/2 in.)
Idle Speed (RPM) ------------------------------------------ 3,300
Clutch Engagement Speed (RPM) ----------------------- 5,100
Wide Open Throttle (RPM) ------------------------------ 11,250