Epson 85HD User Manual
Page 53
Doing More with Epson MovieMate
53
Viewing Status Information and Resetting the Lamp Timer
You can use the Info page on the Visual Setup menu to view the number of hours the lamp
has been used, and to reset the timer after you install a new lamp. You can also view video
signal information and error codes for any problems that occur.
1. Press
on the remote control. You see the Visual Setup menu.
2. Press
to highlight
Info
, then press
to display the lamp usage and other
information.
Note: If the lamp has been used less than 10 hours, 0H is displayed.
3. To reset the lamp timer after replacing the lamp, press
.
4. Press
to exit the menu.