Epson 85HD User Manual

Page 36

Using Epson MovieMate with Other Equipment

After you connect your equipment to the projector, follow these steps to begin:

1. Make sure all of the equipment is plugged into a power source.

2. Open the lens cover and press the

button on the projector or the

button on the

remote control.

3. Press the

button on the projector or the

button on the remote control.

4. When you see the menu, use the down-arrow or up-arrow button to select the correct

source (if necessary), then press the

button on the projector or the

button on the

remote control.

■

If you used the HDMI connection, select

HDMI

■

If you used the component video connection, select

Component

■

Otherwise, select

Video

5. Turn on the power to the connected video equipment, then start playing the video or

game.

6. Normally, your projector selects the correct aspect ratio automatically. If you need to

change the aspect, press the

button on the remote control and select

Normal

16:9

Zoom

(if available for the video source you’re using).

After you start playing your video or game, you may find that you need to adjust the position
or shape of the picture. Or you may need to focus or zoom the image. See “Adjusting the
Picture” on page 26.

Output

Audio

White

Red

Component Video Connection

RCA stereo
audio cable

Component video cable

For connecting a cable or satellite TV receiver, DVD player, DVR, or game console.