Before fi rst use, Charging the appliance, Assembly/disassembly – Silvercrest SHSS 12 B2 User Manual
Page 39
![background image](https://www.manualsdir.com/files/855051/content/doc039.png)
36
SHSS 12 B2
GB
Before fi rst use
NOTE
►
This appliance is supplied with non-charged
batteries. The batteries must be charged for
6 hours before the fi rst use.
■
Remove all packaging materials as well as foils
and stickers
Charging the appliance
NOTE
►
Ensure that the appliance is switched off
before starting to charge the batteries.
■
To charge the appliance, connect the charger i
to a mains socket and insert the barrel jack o
into the charging socket s on the cradle d.
Feed the cable through the cable channel on the
charging socket s, so that the cradle d is not
resting on the cable.
■
Place the handle with the attached hand element
4 onto the cradle d.
The red control lamp 3 illuminates.
When the appliance is fully charged, the indicator
light 3 illuminates green.
Assembly/disassembly
Connecting the hand element to the
handle/removal from handle
Fig. 1
Fig. 2
■
To connect the hand element 4 to the handle,
push the tip of the hand element 4 into the
opening in the hand element recess e.
■
Then press the grip 1 of the hand element 4
into the handle so that the hand element 4
clicks fi rmly into position (Fig. 1).
■
To remove the hand element 4 from the handle,
press the "Hand element" release w.
■
Then pull the hand element 4 upwards and
forwards out of the hand element recess e
(Fig. 2).
IB_100116_SHSS12B2_LB1.indb 36
19.09.14 14:06