Emerson Radio PD6900 - Manual (Page 9)

8
FOR BETTER RECEPTION
NOTE :
1.) If you are listening to an FM Stereo station and the FM MODE
switch is set to STEREO, the STEREO indicator will appear in
the display.
2.) When too much noise is heard during FM STEREO reception, set FM
MODE switch to MONO position.
After listening press the POWER button to power ‘Off’.
AM
FM
Rotate the unit for best reception.
Extend the telescopic antenna.
FM MODE
STEREO
MONO POWER
MHz
FM STEREO
PRESET RADIO STATION IN THE MEMORY
The radio in this sysrtem has a 20 station memory. You can store up to 10 AM and 10 FM
stations in memory.
1.) Tune to the desired station, then press
PROGRAM button. PROGRAM indicator
flashes in the display.
MHz
PROGRAM
FM STEREO
2.) Press MEMORY UP button to select the
p r e s e t m e m o r y l o c a t i o n . P r e s s
PROGRAM button, the station is stored.
REPEAT
MEMORY UP
PROGRAM
MEMORY
MHz
PROGRAM
FM STEREO
Repeat steps 1 and 2 to store additional stations as desired.
PROGRAM
MEMORY
RECALLING STATIONS IN THE MEMORY
1.) Press RADIO button and BAND button
to select AM or FM.
CD RADIO BAND
2 1
2.) Press MEMORY UP button to select the
preset location, 1 to 10.
REPEAT
MEMORY UP
PD6900_ib_053102.p65 31/5/2002, 17:24 8