Epson CX5000 - Manual (Page 10)

10 Copying a Photo or Document
Copying a Photo
1. Make sure the Epson Stylus CX5000 Series
all-in-one is turned on.
2. Place the photo on the glass as described on page 7. Be sure to close the
document cover.
3. Load up to 20 sheets of letter-size, 4 × 6-inch, or 5 × 7-inch photo or matte
paper (see page 5 if you need instructions).
4. Press the Copies button until you see the correct number
of copies in the Copies window. You can select up to 9
copies at a time this way.
To make more than 9 copies, see page 11.
5. Press the paper type button to select Photo Paper .
6. Press the paper size button to select Letter , 4"x6" , or
5"x7" .
7. If you want borderless photos (printed without a white
border), press the Fit to Page button. Otherwise, photos
are printed with a small white border.
8. To make a color copy, press the x Start Color button.
To make a black and white copy, press the x Start B&W
button.
The On light flashes and after a moment the CX5000 Series starts printing.
If you need to stop copying at any time, just press the y Stop button. Do not pull
out paper that is being printed; it will be ejected automatically to the output tray.
Note:
The copies may not be exactly the same size as the original.