Silvercrest SHBS 500 B1 - Manual (Page 70)

68 GB
6. Figures H+I: press the black fastening clips carefully away from the sides
of the board and remove the board from its fastening.
7. Figure J: release the connections between the battery and the board with a
pair of pliers/wire cutters. Remove the exposed battery. Take the battery and
the device separately to suitable disposal.
The lithium-ion battery used for this device may not be treated as
household waste. The battery must be disposed of properly. Con-
tact battery distributors or local waste disposal points for this.
9. Troubleshooting
If your device fails to function as required, please try this checklist first. Perhaps
there is only a minor problem, and you can solve it yourself.
DANGER! Risk of electric shock!
Do not attempt to repair the device yourself under any circumstances.
Fault Possible causes/Action
No function
• Has the device been connected to the power sup-
ply?
• Is the battery empty?
The blades2 of the
shaving head9 are not
running smoothly • Has the shaving head been cleaned and the
blades oiled?
Li-ions
__GRA93480_B1.book Seite 68 Montag, 9. September 2013 10:20 22