Silvercrest SPMR 8000 A1 - Manual (Page 28)

SilverCrest SPMR 8000 A1
26 - English
Chronometer
The SilverCrest SPMR 8000 A1 includes a chronometer function for time measurement. The chronometer
can count to 59’59’’99.
 Press and hold the Call button [4] for three seconds to activate the
chronometer. The chronometer appears on the display.
 Press the Up  button [9] to start time measurement.
 Press the Up  button [9] to stop time measurement.
 Press the Down  button [6] to reset time measurement.
 Press and hold the Call button [4] for three seconds to exit the chronometer.
The chronometer is not available while channel monitoring is enabled.
Display backlight
The PMR display [1] has a backlight to facilitate operating the device in darkness. The backlight will
switch on automatically when pressing any button except the PTT button [11] and the Call button [4].
The On/Off
button [10] activates the backlight only when powering the unit on.
The backlight will switch off automatically after six seconds.