Silvercrest SPMR 8000 A1 - Manual (Page 26)

SilverCrest SPMR 8000 A1
24 - English
Dual scan
Your PMR will normally receive one channel only (with or without CTCSS or DCS code). The dual scan
function allows the monitoring of a second channel with CTCSS or DCS code.
While dual scan is enabled, your PMR will toggle between the two channels.
 Press the Menu button [5] eleven times. The indication “DCM OF” will
flash on the display.
 Press the Up  [9] or Down  [6] button to switch to a different channel.
 Press the Menu button [5] to confirm the selected channel and continue to
CTCSS selection. Press the Menu button [5] again to go to DCS selection.
 Press the Up  [9] or Down  [6] button to set a different CTCSS or DCS
code.
 Press the PTT button [11] to confirm the setting and return to idle mode.
To disable this function, select ”OF” when choosing the DCM channel.
Call tones
The call tone is an audible signal that alerts other stations that you want to transmit a message. The
SilverCrest SPMR 8000 A1 supports 15 call tones.
Selecting the call tone
 Press the Menu button [5] eight times. The indication “CA” will appear on
the display, the number of the current call tone will flash and the call tone can
be heard.
 Press the Up  [9] or Down  [6] button to set a different call tone.
Sending the call tone
Briefly press the Call button [4] to send the call tone over the current channel.