Euro-Pro EP76 User Manual

Page 6

Assembling Your Vacuum Cleaner

Changing the Micro-Exhaust Filter

NOTE: Always remove the power plug from the wall outlet before

assembling or removing accessories.

Micro-exhaust Filter

Attaching the Flexible Hose into the Vacuum

Connect the flexible hose into the air intake

duct. Push in until you hear a “click”, indicating

it is in its position.
To remove the flexible hose, reverse the
operation.

Fitting the Extension Tube to the
Curved Wand / Hose Extension

Push the extension tube into the curved

wand / hose extension, as shown in the illustration.

1. Open the lid.

2. Remove the used micro-exhaust filter.

3. Insert a new micro-exhaust filter.

4. Close the lid.

Motor Thermostat

Fitting the Floor Brush to the Extension Tube

IMPORTANT: This motor is equipped with a heat sensitive thermostat. If

for some reason the vacuum cleaner will overheat, it will
then stop working automatically. When the motor will cool
off, the unit will restart by itself.

Extension
Tube

Push the extension tube into the Floor brush,
as shown in the illustration.