Silvercrest SPM 2000 B2 User Manual

Page 67

SPM 2000 B2

NOTE

The green control lamp "Ready" 5 lights up when the heat level control 2 is
set at "0". As soon as you set the heat level control 2 to the desired position,
the green "Ready" control lamp 5 goes out until the temperature has been
reached.

NOTE

The green "Ready" control lamp 5 may go out intermittently in the meantime
and the red "Power" control lamp 1 lights up. This indicates that the temperature
has brieﬂ y fallen below the set temperature and the appliance is heating itself
back up.

♦

Open the lid and place the food to be toasted/grilled on the lower hotplate 9.

♦

Close the appliance lid using the handle 6.

♦

Due to the sliding hinges ﬁ tted to the upper hotplate 9, it always lies parallel
to the lower hotplate 9 even with large quantities of food. This guarantees an
optimal grilling result.

♦

Check the browning of the food after a while. To do this, open the appliance
lid using the handle 6.

NOTE

Start with short grilling times and increase these until you have found the cor-
rect duration.

♦

When you are satisﬁ ed with the level of browning, remove the food.

CAUTION

Damage to the appliance!

►

Do not use pointed or sharp objects to remove the food. These could dam-
age the surfaces of the hotplates 9!

♦

Turn the heat level control 2 to “0” and remove the plug from the power socket.

CAUTION

►

Always remove the plug from the mains power socket when the appliance is
not in use! Setting the heat level control 2 to "0" is not enough!

IB_104005_SPM2000B2_CH.indb 64

16.01.15 11:00