Elation Professional 70 - Manual (Page 27)

DESIGN Brick 70™
©Elation Professional, Los Angeles Ca. 26 www.ElationLighting.com
10. OPERATION
Operating Modes: The Design LED Brick 70™ can operate in six different modes. This next
section will detail the differences in the operating modes.
• Auto Program Mode (Master) - The fixture will chase through the built-in programs,
sending a DMX control signal to all other fixtures connect via DMX cables instruction for
a synchronized light show.
• Auto Program Mode (Stand-alone) - The fixture will chase through the built-in program.
This feature is great for store front with custom logos, where as the logos need to be
displayed but the use of a controller is unwanted.
• Music Control Mode (Stand-alone) - The fixture will react to sound, chasing through
the built-in programs. Great for small clubs or DJ that do not want to bother with
programming.
• Music Control Mode (Master/Slave) - You can daisy chain up to 16 fixtures together to
get a synchronized light show without the need of an external controller. The fixtures will
react to sound, chasing to a synchronized light show.
• Set To Slave – This function will set the fixture to slave mode for use in either the auto
program or music control program modes. DMX control mode - This function will allow
you to control each individual fixtures traits with a standard DMX-512 controller such as
the Elation
®
Show Designer 2.
10.1 Stand-Alone Operation (Auto Program or Music Control): This mode allows a
single fixture to run to the built-in programs with or without sound. Only use this
mode when running a single fixture, or when running several fixtures as individuals.
 Mount your fixture in a secure and stable manner.
 For functionality without sound control: Access the “Function” menu and
select the “Auto Program” function, this will give you access to the “Auto