Silvercrest SIUR 10 A1 - Manual (Page 141)

138 SIUR 10 A1
GB
Abbreviation Diff erence City
SYD +10 Sydney / Australia
NOU +11 Noumea / New Caledonia
AKL +12 Auckland / New Zealand
♦ Touch the Set|OK control point on the device or press the Set OK key
on the remote control again to save the current setting and to change to the
next menu item.
Setting iSync
You can use this function to set whether the device should update the displayed
time using the device at the iPort.
Precondition: The device is in clock/standby operating mode.
♦ Touch the Set|OK control point on the device or press the Set OK key
on the remote control 16 times.
i-Sync
appears on the display .
♦ Press one of the i /i control points / on the device or press then
i /i keys / on the remote control to switch the function on (
ON
)
or off (
OFF
).
♦ Touch the Set|OK control point on the device or press the Set OK key
on the remote control again to save the current setting and to change to the
next menu item.
Setting the snooze time
You can use this function to set the period for the snooze function.
Precondition: The device is in clock/standby operating mode.
♦ Touch the Set|OK control point on the device or press the Set OK key
on the remote control 17 times.
SNOOZE
will appear on the display , and
the minute display blinks.
♦ Press the i /i control points / on the device or press then i /i
keys / on the remote control to set the required period between 1 and
59 minutes.
♦ Touch the Set|OK control point on the device or press the Set OK key
on the remote control again to save the current settings and to quit the
settings menu.
IB_86209_SIUR10A1_LB1.indb 138 IB_86209_SIUR10A1_LB1.indb 138 11.03.13 09:21 11.03.13 09:21