Attachment ﬁ tting / removal, Switching on/oﬀ / selecting a heat level, Fitting attachments – Silvercrest SWCD 1000 A1 User Manual

Page 9: Removing attachments

SWCD 1000 A1

Attachment ﬁ tting / removal

WARNING! RISK OF INJURY!

►

After operation, the appliance components may be hot!

Fitting Attachments

■

Insert the desired attachment into the attachment insertion slot 1, so that
the front arrow symbol on the attachment points at the arrow symbol on the
attachment insertion slot 1

■

Turn the attachment clockwise until it clicks into place. The back arrow on
the attachment now points at the arrow on the attachment insertion slot 1

Removing attachments

■

First switch the appliance oﬀ and allow it to cool down..

■

Press the release button “push” 7 and turn the attachment anti-clockwise

■

The attachment can now be removed by pulling it out of the attachment inser-
tion slot 1.

Switching on/oﬀ / Selecting a heat level

■

When you have inserted the required attachment and connected the plug
with the mains power socket, you can now switch the appliance on with the
level switch 3 and select the output level:

–

“0“ The appliance is switched oﬀ

–

“1“ for a reduced air-ﬂ ow strength with heat

–

“2“ for a high air-ﬂ ow strength with heat

■

You switch the appliance oﬀ by sliding the level switch 3 to the position “0”
(= appliance oﬀ ).

■

To ﬁ x the styling, you can use the slide switch Cool Shot 2. The styling will
be ﬁ xed by the cool air stream:

–

During operation, slide the slide switch Cool Shot 2 upwards.
The air ﬂ ow will be cooler.

–

When you want to deactivate the cool air stream, slide the slide switch
Cool Shot 2 downwards.

IB_72216_SWCD1000A1_PL_HU.indb Abs2:7

27.02.12 11:47