Silvercrest H-8666 - Manual (Page 8)

6 GB
6. Operation
Application area
The hand blender is suitable for pureeing
fruits and vegetables, soups, dips and sauc-
es, as well as blending drinks and making
milkshakes.
NOTE: adapt the rotation speed to suit the
foodstuff to be blended. Select normal
speed ( 2) for soft foodstuffs and turbo
speed (Turbo 3) for harder foodstuffs.
This is how it is done
DANGER! Risk of injury from
cutting!
• Never reach into the rotating blades.
Do not touch rotating parts with spoons
or similar utensils. Keep long hair or
loose clothing away from rotating parts
as well.
• Only switch on the device when the
blender 5 is immersed in the foodstuff.
• The blade continues to rotate after the
device is switched off. Wait until the
blade has come to a standstill before
you pull the hand blender out of the
food.
WARNING!
• The device is designed for a maximum
operating time of 1 minute without inter-
ruption. After this, the device must re-
main switched off until it has cooled
down to room temperature.
• In order to prevent damage to the de-
vice, interrupt the blending process im-
mediately if the blade is either turning
with difficulty or not turning at all. Pull
out the mains plug 1 and check whether
there is something in the vessel blocking
movement or whether the food is too
tough. Also check whether the device is
assembled correctly.
1. Fill the foodstuff to be blended or pu-
reed into a narrow, high vessel with a
flat bottom. You may also blend food-
stuffs directly in the cooking pot.
2. Immerse the blender 5 into the food-
stuff.
3. To blend at normal speed, hold the
power button 2 down.
To blend at turbo speed, hold the power
button Turbo 3 down.
4. Move the blender 5 up and down a bit
in the foodstuff, to ensure that it is blend-
ed evenly.
5. When you are finished, let go of the
power button 2 or Turbo 3.
NOTE: if the blender 5 builds up a suction
and adheres to the bottom of the vessel, let
go of the power button
2 or Turbo 3
briefly.
7. Cleaning
Clean the device prior to its first use!
DANGER! Risk of electric
shock!
• Pull the mains plug 1 out of the wall
socket before you clean the hand blend-
er.
• The motor unit 4, the power cable and
the mains plug 1 must not be immersed
in water or other liquids.
DANGER! Risk of injury from
cutting!
When washing manually, the water should
be sufficiently clear that you can see the
blade easily.
WARNING! Risk of material dam-
age! Do not use any astringent or abrasive
cleaning agents.
1. Pull out the mains plug 1.
2. Remove the blender 5 from the motor
unit 4. (Figure B)
__RP88838_B4.book Seite 6 Montag, 4. März 2013 12:43 12