Assembly – Silvercrest Z32155 User Manual
Page 13

GB 13
Avoid contact with skin, eyes and mucous membrane. In the event of
contact with battery acid, rinse the affected area with plenty of water
and / or consult a doctor.
Never use rechargeable batteries.
The supply terminals are not to be short-circuited.
Do not mix old batteries with new ones.
Remove the batteries from the device if they have not been used for
a long period.
Make sure you insert the batteries the right way round (polarity).
Assembly
Note: You will need a screwdriver and a drill to assemble the doorbell.
Note: Only use the screws and dowels supplied for the assembly of
the device.
Mount the receiver (see Fig. E)
Mount the transmitter (see Fig. F)
Preparing for use
Inserting / replacing the batteries
Insert the batteries to provide power to the device before preparing
it for use.
60113_silv_Tuerklingel_content_PL_HU_SI_CZ_SK.indd 13
16.05.14 13:21