Silvercrest Z30914 - Manual (Page 55)

GB/MT 55
Operation
Setting the volume
Press the volume button 3 until the desired volume is reached. There
are a total of 5 possible volume settings: very loud, loud, medium,
soft, very soft.
Selecting the chime
note: The doorbell has 36 different chimes.
Press the melody selection button 4 . The first audible signal sounds.
Press the melody selection button 4 again to move on to the next
audible signal.
Repeat this process until you have selected your desired audible signal.
The last-selected audible signal is automatically stored.
Troubleshooting
After the influence of extraordinary environmental conditions (e.g. a strong
electromagnetical field) the function of the item may be affected. In this
case, please take off the batteries of both appliances for approximately
2 minutes. Then proceed again as described in the section “Synchronising
the transmitter / receiver”.
Electrostatic discharges may lead to malfunctions. If such malfunctions
do occur, remove the battery for a short time and then replace it again.
89970_silv_Tuerklingel_content_LB5.indd 55 05.03.13 15:38