Steam ironing, Ironing with steam blast, Gb ie cy – Silvercrest SDB 2400 A1 User Manual

Page 13

SDB 2400 A1

TIPS

►

The iron takes longer to cool down than to heat up. Therefore, ﬁ rst iron
delicate fabrics at lower temperature settings.

►

With mixed fabrics, always set the temperature for the more sensitive ﬁ bre.

3) Adjust the steam regulator 1 to

4) Select the best suitable temperature setting with the temperature regulator 7.

The control lamp "Temperature" 4 glows.

5) When the set temperature has been reached, the control lamp "Tempera-

ture" 4 goes out. Wait until the control lamp "Temperature" 4 goes out.

NOTICE

►

To help with ironing severely wrinkled or very dry materials, you can dampen

them by using the ﬁ ne water spray 2

button.

6) You can now start ironing.

Steam ironing

The temperature regulator 7 must be at least at level

or higher.

Otherwise it cannot produce any steam.

1) Set the steam regulator 1 to the desired steam setting.

2) Wait until the control lamp "Temperature" 4 goes out.

3) You can now start ironing.

Ironing with steam blast

The steam blast is especially suitable for smoothing diﬃ cult to reach parts of a
garment.

The temperature regulator 7 must be in the red marked setting range

at the

least in order to produce a steam blast.

1) Slightly raise the steam iron..

2) Press the steam blast button

IB_66493_SDB2400A1_GR_IE_CY.indb Abs2:11

24.04.12 08:38