Silvercrest SMA 500 A1 - Manual (Page 84)

81 SMA 500 A1
GB
Requirements for the setup location
For safe and trouble-free operation of the device, the setup
location must fulfi l the following requirements:
■ The device must be placed on a fi rm, fl at and level surface.
■ Do not place the device in a hot, wet or extremely moist
environment or close to fl ammable materials.
■ Set up the device so that it is not exposed to direct sun-
light or strong artifi cial light.
Controls
Speaker
2 Connection socket AUX-IN (3.5 mm jack socket)
3 Operating and charging LED
4 On/Off switch (POWER ON / OFF)
5 Volume control (VOL + / –)
6 BASS switch (ON / OFF)
7 Mini USB connection socket (POWER INPUT)
8 Speaker cable with 3.5 mm jackplug
9 Charging cable (USB to Mini USB)
IB_46771_SMA500A1_LB1.indb 81 IB_46771_SMA500A1_LB1.indb 81 05.02.14 11:58 05.02.14 11:58