Radio reset (reset), Gb display – Silvercrest SAR 28 A1 User Manual

Page 130

126

SAR 28 A1

Display

♦

Press and hold the BD/DISP

button until the time (CT) is shown on the

display

. Now keep pressing the BD/DISP button to have the following

information displayed in turn:

Radio station, time (automatically set with RDS reception), frequency and PTY set-
tings (these RDS functions are sent by broadcasting services in various volumes;
also refer to Section “Radio functions”).

NOTE

►

If you are not receiving any RDS or PTY information, PTY NONE is shown on
the display.

►

The radio switches back to standard operation after around 5 seconds
without user input.

Radio reset (RESET)

To reset the device to its default factory settings, keep the RESET

button

pressed for about 6 seconds with a sharp object, such as a pen.

NOTE

►

To access the RESET button, the face plate must be completely removed,
see also Section "Removing the face plate".

Reset the device:

▯

when using for the ﬁ rst time,

▯

after connecting the cables,

▯

when not all function buttons are working,

▯

when an error message is shown on the display,

▯

if there is an obvious malfunction in the device.

IB_42775_SAR28A1_LB1.indb 126

22.10.13 16:07