Handling and use, Switching on and oﬀ, Settings – Silvercrest SAR 28 A1 User Manual

Page 129: Volume, Switching mute on / oﬀ, Operating mode

125

SAR 28 A1

Handling and use

This section provides you with important information on handling and using the
device.

NOTE

►

If no setting is conﬁ gured and/or no button pushed within about 5 seconds,
the device returns to its previous operating mode. Settings changed are saved.

Switching on and oﬀ

♦

Press the

/MU

button to switch the device on. The WELCOME display

is shown.

♦

To switch oﬀ , keep the

/MU button pressed. The GOODBYE display is

shown.

Settings

WARNING

Hearing damage as a result of too high a volume!

Setting the volume too high can result in permanent hearing damage.

►

Set the volume to moderate levels only.

Volume

♦

Turn the multi-controller

to set the volume.

Switching mute on / oﬀ

♦

Press the

/MU button brieﬂ y to turn the sound oﬀ . The MUTE ON message

appears in the display.

♦

Press the

/MU button again to turn the sound on again. Muting is can-

celled when receiving a PTY or TA station or if you change station or source.

Operating mode

♦

Press the MD/PTY

button to switch between radio reception (TUNER),

card reader (CARD), USB port (USB) and audio input (AUX).

NOTE

►

The CARD and USB operating modes can only be enabled once the appro-
priate medium has been inserted.

IB_42775_SAR28A1_LB1.indb 125

22.10.13 16:07