Service and operation, Switching the device on and off, Adjusting the volume – Silvercrest KH 2431 User Manual
Page 108: Select operational mode
105
Service and Operation
KH 2431
GB
Service and Operation
In this chapter you will receive important information for the service and operation
of the device.
Switching the device on and off
♦
To switch the device on activate the switch POWER . HELLO will be
displayed on the screen and then the last used operating mode is activated.
♦
To switch the device off activate the switch POWER again.
Adjusting the volume
Prerequisite: The device is switched on.
♦
Turn the volume control or press the buttons VOL+ or VOL- on the
remote control to adjust the sound volume. The set sound volume level is
shown in the Display . The sound volume level can be set between 0
(Vol. min.) and 30 (Vol. max.).
NOTE
►
The set sound volume level is valid for all functions.
Select operational mode
♦
Press the button FUNCTION to switch between radio reception (TUNER),
USB port (USB), card slot (CARD), record player (PHONO) and audio
input (AUX).
Buch_53140_LB2.indb 105
05.04.12 12:22