Silvercrest KH 2431 - Manual (Page 103)

100
Setting up and connecting
KH 2431
GB
Before the initial use
Fitting the turntable
♦ Place the belt around the underside of the turntable .
♦ Pull the belt outwards.
♦ Place the turntable on the motor shaft so that the recess in the turntable
lies over the belt pulley. Thereby, hold the belt tensioned.
♦ Place the belt around the belt pulley of the drive motor.
♦ Place the turntable mat on the turntable .
Setting the tracking pressure
♦ Insert the counterweight onto the tone arm until
it clicks into place. Thereby, the adjustment
ring should face forwards.
♦ Remove the protective cover from the stylus.
♦ Release the securing lever of the tone arm.
♦ Move the lever to the front position to raise
the tone arm.
♦ Swing the tone arm over the turntable .
IMPORTANT
Potential stylus damage.
The stylus can be damaged.
► Hold the tone arm fi rmly so that the stylus does not touch the turntable.
Buch_53140_LB2.indb 100 05.04.12 12:22