Silvercrest SDBO 1850 A1 - Manual (Page 9)

SDBO 1850 A1 7
• Ensure that the packing film does not
become a deadly trap for a child.
Packing film is not a toy.
3.7 Protection against material
damage
Caution! To avoid any material damage,
please observe the following requirements.
• Ensure that the hot steam can escape
from the steam vent 6 freely and that
there are no objects or furniture in the
way that are at risk of being damaged.
• When you are not using the appliance,
do not store any other items in the
appliance other than those accessories
which have been delivered with it.
• Only use the accessories provided or
any accessories which are
recommended in these Operating
Instructions. Using accessories from
another manufacturer or accessories
which have not been recommended may
result in damage to the appliance.
4. Unpacking and setting up
Note: As the appliance and heating
elements are supplied with a thin film of
grease, there might be a
small amount of
smoke and odour the first time the appliance
is used. This is not harmful and will stop
after a short while. Please ensure in the
meantime that there is sufficient ventilation.
1. Unpack the appliance from the
packaging.
2. Remove the transport packaging.
3. Remove the accessories and packaging
material from inside the appliance.
4. Check that the appliance shows no signs
of damage.
5. Screw the spacers provided to the rear
of the appliance.
6. Clean the appliance and the accessories
(see “9. Cleaning” on page 23).
7. Select a place to put the appliance,
– somewhere which complies with the
safety instructions (see “3. Safety
Information” on page 4);
– a place that is sturdy, level and fire-
proof, and is approx. 5 cm away from
other objects;
– where the steam can freely escape
from the steam vent 6 ;
– where the door 2 can be fully opened.
RP57458 Dampfgarer LB6 Seite 7 Montag, 27. August 1956 9:07 21