Silvercrest SBTF 10 B2 - Manual (Page 14)

11 SBTF 10 B2
GB
Charging 5 V Devices
● Check the max. input voltage (5V) and the max. power
input (1000 mA) of the device which you want to charge.
For this, consult the operating manual of the device.
● Connect the device to be charged with the USB port 4
on the hands free device. The device now receives its
power supply from the hands free device. If the device
is equipped with a charging indicator light, this will in-
dicate that the device is being charged.
Troubleshooting
If you cannot connect the hands-free appliance with a
compatible mobile telephone, proceed as follows:
● Ensure that the Bluetooth
®
function in the mobile
telephone is activated.
● Ensure that the hands-free appliance is correctly
installed, switched on and supplied with electricity.
● If you use several Bluetooth
®
appliances, ensure that
a previously created Bluetooth ® connection of the
mobile telephone is separated.
● Ensure that the hands-free appliance is distanced a ma-
ximum of 10 metres from the mobile telephone and that
there are no barriers or electronic devices between them.
If these measures do not correct the problem, please con-
tact the appropriate service partner for your country.
Cleaning and Care
Danger of electrocution!
● Before cleaning, always separate the electricity supply
from the appliance!
● NEVER submerse the appliance in water or other liquids!
● Do not permit liquids to permeate into the housing!
● Never open the housing of the appliance! There are
no user-serviceable elements inside.
IB_78534_SBTF10B2_LB4.indb 11 IB_78534_SBTF10B2_LB4.indb 11 20.08.12 09:21 20.08.12 09:21