Silvercrest SCAZ 5.00 A1 - Manual (Page 33)

SCAZ 5.00 A1 Recording
English - 31
Capturing Pictures
ƒ Open the display and then rotate it according to your needs. The
device powers on automatically.
ƒ If the current mode is not set to photo capturing, select it by using the
mode selector (7).
ƒ Move the navigation button (5) up or down to adjust exposure
compensation in four steps to a positive or negative value. The set
value is indicated on the display.
ƒ Move the navigation button (5) multiple times to the left to select a
White Balance preset. The corresponding icon will show on the
display. No icon will be shown for automatic White Balance.
ƒ Move the navigation button (5) to the right to toggle between Manual
focus and Macro mode.
ƒ If necessary, use the zoom swivel button (20) to select a larger to
smaller scene area. Move the swivel button to the right to zoom in or
move the swivel button to the left to zoom out.
ƒ Press the shutter button (21) to capture a picture. During saving the
power indicator (4) will light red.
ƒ The photo taken will be shown on the display for a few seconds. After
this, the device will return to photo capture mode.
In photo mode, different icons may appear on the display informing you
about the current settings.